====== Educator e collar ====== https://www.educatorcollars.com/manuals/300-302-owners-manual.pdf {{300-302-owners-manual.pdf}} __HOW TO FIND THE PROPER STIMULATION LEVEL__
Rotating clockwise increases the stimulation level, and rotating counter-clockwise lowers the stimulation level. It is highly recommended that the user practices changing levels and modes before putting the collar receiver on a dog. Setting the correct stimulation level for your dog is very important. To set your “conditioning” stimulation level, correctly put the collar receiver on your dog (see page 9 for instructions). Let him/her get used to the collar receiver for a couple of hours. While watching your dog, turn the level to “0” and press the continuous stimulation button. Slowly turn the stimulation up at a rate of approximately 2-3 levels per second. When your dog first perceives the stimulation, usually between 5 and 20, release the button. This is your “conditioning” stimulation level. You may need to increase the “conditioning” level a few levels to get your dog to respond at first, some dogs are more stubborn and need more stimulation. The boosted level is typically 5 to 20 levels higher than the “conditioning” level.
__HOW TO SET THE BOOST__
Boosted Stimulation adds the set boost level to the stimulation level, great for those situations when your dog doesn't respond to the working level. Determining the Boosted stimulation level is a little more difficult than stimulation level setting due to the wide differences in temperaments and stimulation tolerance among the many breeds of dogs. On average, it is normally 5 to 20 levels higher than the “Conditioning” level. It is important to have it set high enough to get the desired response from your dog. 1. Change the mode to Momentary Mode. (Press M/C button until “M” is displayed) 2. Change the intensity level to “0”. 3. Press S(Black) button for more than 5 seconds. 4. The intensity level will change from "0" to a flashing "1". 5. Rotate the dial to the desired boost level (1 to 60). 6. Press S(Black) button again to save and exit the boost level changing mode.
__TRAINING TIPS__
IMPORTANT TRAINING TIPS E-Collars can be used to reinforce commands your dog already knows or as a learning sensation when paired with leash pressure. It is not a replacement for basic leash obedience training, but a tool to allow you to better communicate with your dog. For best results, use the least amount of stimulation required to get the attention of your dog. A calm and consistent approach to training will always produce better long term results. It is highly recommended that aggressive dogs be taken to a professional trainer for evaluation before e-collar use. There are many different e-collar training techniques recommended by a variety of professional trainers. We believe you, the owner of the dog, can best determine the most successful technique for your dog. We recommend first time users to emerse themselves in learning about the proper techniques or seek a professional e-collar trainer. The technique used in the initial introduction of the e-collar is very important to the success of e-collar training. Search E-Collar Technologies on youtube and subscribe to our channel, new training videos are posted weekly. Also "Like" and subscribe to our Facebook page to receive more training advice and connect with other e-collar users.
====== youtube ====== {{youtube>bFZ0pFZnNuY}} Why I Use E Collars / And How I do Not Use E Collars {{youtube>y11GAfS8aU4}} What to do when you can't find the dog's working level on the e collar / remote collar {{youtube>wraF_W5DPac}} E Collar Training For Everyday Dog Owners | Pak Masters Dog Training Nashville {{youtube>j72VKslSiMI}} HOW TO Set Up the E collar / Remote Collar Instructions for my clients / E-Collar {{youtube>8ajr_2WKFo0}} How to change the boost level on a Mini Educator e-collar | Follow The Leader Dog Training {{youtube>6ma8ijFkuXM}} AD-TV: Mini Educator E-Collar How To