https://www.educatorcollars.com/manuals/300-302-owners-manual.pdf
300-302-owners-manual.pdf

HOW TO FIND THE PROPER STIMULATION LEVEL

Rotating clockwise increases the stimulation level, and
rotating counter-clockwise lowers the stimulation level.

It is highly recommended that the user practices changing levels and
modes before putting the collar receiver on a dog.

Setting the correct stimulation level for your dog is very important. To
set your “conditioning” stimulation level, correctly put the collar
receiver on your dog (see page 9 for instructions). Let him/her get
used to the collar receiver for a couple of hours.

While watching your dog, turn the level to “0” and press the
continuous stimulation button. Slowly turn the stimulation up at a rate of
approximately 2-3 levels per second. When your dog first perceives the
stimulation, usually between 5 and 20, release the button. This is your
“conditioning” stimulation level. You may need to increase the
“conditioning” level a few levels to get your dog to respond at first,
some dogs are more stubborn and need more stimulation. The boosted
level is typically 5 to 20 levels higher than the “conditioning” level.

HOW TO SET THE BOOST

Boosted Stimulation adds the set boost level to the stimulation level,
great for those situations when your dog doesn't respond to the
working level. Determining the Boosted stimulation level is a little
more difficult than stimulation level setting due to the wide
differences in temperaments and stimulation tolerance among the
many breeds of dogs. On average, it is normally 5 to 20 levels higher
than the “Conditioning” level. It is important to have it set high
enough to get the desired response from your dog.

1. Change the mode to Momentary Mode.
(Press M/C button until “M” is displayed)
2. Change the intensity level to “0”.
3. Press S(Black) button for more than 5 seconds.
4. The intensity level will change from “0” to a flashing “1”.
5. Rotate the dial to the desired boost level (1 to 60).
6. Press S(Black) button again to save and exit the boost level
changing mode.

TRAINING TIPS

IMPORTANT TRAINING TIPS

E-Collars can be used to reinforce commands your dog already
knows or as a learning sensation when paired with leash pressure. It
is not a replacement for basic leash obedience training, but a tool to
allow you to better communicate with your dog. For best results, use
the least amount of stimulation required to get the attention of your dog.
A calm and consistent approach to training will always produce better
long term results. It is highly recommended that aggressive dogs be
taken to a professional trainer for evaluation before e-collar use. There
are many different e-collar training techniques recommended by a
variety of professional trainers. We believe you, the owner of the dog,
can best determine the most successful technique for your dog. We
recommend first time users to emerse themselves in learning about
the proper techniques or seek a professional e-collar trainer.
The technique used in the initial introduction of the e-collar is very
important to the success of e-collar training. Search E-Collar
Technologies on youtube and subscribe to our channel, new training
videos are posted weekly. Also “Like” and subscribe to our Facebook
page to receive more training advice and connect with other e-collar
users.

Why I Use E Collars / And How I do Not Use E Collars

What to do when you can't find the dog's working level on the e collar / remote collar

E Collar Training For Everyday Dog Owners | Pak Masters Dog Training Nashville

HOW TO Set Up the E collar / Remote Collar Instructions for my clients / E-Collar

How to change the boost level on a Mini Educator e-collar | Follow The Leader Dog Training

AD-TV: Mini Educator E-Collar How To